F12 now always reloads from Cloud instead of local cache
The F12 key (on the main screen) will reload the last patient loaded. It will also always check the Cloud for any new scans that have been taken. Before it would reload the patient from the local cache, sometimes not loading scans that had not been synced from the Cloud.
DT minimum and maximum setting
Direct Temperature settings can now be changed from the default of 30-38°C. This option is found under Setup, towards the right of the Scan Options tab.
DT Highlight area setting
Direct Temperature Center Highlight settings can now be changed from the default of 33-35°C. This option is found under Setup, towards the left of the Scan Options tab.
English Units improvements
If the English Units setting is enabled, lines in the DT and Delta T graphs now show at 1°F intervals. If not, lines in the DT graphs are at 1°C and lines in the Delta T graphs are at 0.5°C.
Also the DT and DT Highlight settings will be in °F if enabled.
This option is found under Setup, towards the left of the Scan Options tab.
Home Screen view settings
The Home Screen default view can now be set to more options. Previously only Delta Line and Delta Bar Graph were available. This option is found under Setup, towards the bottom of the Scan Display tab.
History Print grid settings
The grid of scans displayed on the Home Screen and on History Reports can now be changed from the default of 2X5. This option is found under Setup, towards the bottom of the Scan Display tab.
Share Patient improvements
Share Patient now lists clinic information to choose who to share the patient with. Also shows the clinics with which the patient is shared. This feature is found in Scan Utilities, Share Patient menu.
Release Notes:
v1.0.0.25 Beta 1
– F12 now always reloads from Cloud instead of local cache
– DT minimum and maximum setting
– DT Highlight area setting
– English Units improvements
– Home Screen view settings
– History Print grid settings
– Share Patient improvements
v1.0.0.24
– ROM Load Fix
v1.0.0.23
– Patient Portal
– BTT -> MCT
– Quick Scan confirmation
– Scan Stats now show in English Units
– Ctrl-Click on Load Patient to refresh from server
v1.0.0.22
– Code 39 driver fix
– Screening Mode Bargraph fix
– Local Sync issue fix
– Daily Report fix
– Export Screen Image to Default Image Location with ‘W’
– Scanning Display Optimizations
– Patient Sharing fix
v1.0.0.21
– ROM Comments fix
– Password Requirements changed
v1.0.0.20
– Recoup cursor fix
– Auto-Fossa
– Custom Bargraph Background Images – Edit Patient – Manage Images
v1.0.0.19
– Network performance improvements
– Output scans to CSV improved
– ROM select port fixed
– Move Scan fixed
– Move Scan from Main right click menu
– Toggle Pre/Post from Main right click menu
– Save printouts to an image file
– Fossa and MCT without a scan
– 8 Week / Pre when Post fixes
– Transparent Overlay control improvements
– Server side fixes
– Congruence Screen redesign
– Recoup improvements
– ROM UI improvements
v1.0.0.18
– Local cache
– Stat display on main screen fixed
– View any 2 in Scan Utilities
– Screening mode fixes
– ROM graphical display
– Re-Evaluation notice fixed
v1.0.0.17
– Fixed Screening mode Load Patient
– Screening mode now has all patient data, not just patterns
– Move scan removes current patient from destination list
– ROM added
v1.0.0.16
– Normal Scan fixed
– Blank names in recoup fixed
– Other misc number fixes
– Detail font can be changed
– Double buffer All the Things! for performance
– Offline Sync bug fixed
v1.0.0.15
– Move scan fixed
v1.0.0.14
– Local Recoup option(Turn off recoup on individual computers)
– Recoup Suite Set option for multiple offices
– Fixed , and . in numbers
– Import fixed
– Pre/Post toggle in Scan Utilities Fixed
– Import from MyoVision
v1.0.0.13
– Main screen now updates properly after making a Composite scan
– Fixed Composite scan and Segmental scan bug
– Scan Utilities Edit Scan fixed
– Composite scans no longer show in 8 week history
v1.0.0.12
– Scan Utilities column reorder bug fixed
– Delete Patient bug fixed
– Minor import bugs fixed
v1.0.0.11
– Reorder and save position of columns in Scan Utilities
– Export data from Scan Utilities as .CSV
– Export patients as .CSV
– Truncate new scan to length of scan 1 with “X”
v1.0.0.10
– Import performance improved
– Check for updates while program running, not just at startup
– More help in Setup
v1.0.0.9
– Export improved again
– Misc. bug fixes
v1.0.0.8
– Export improved
– Segmental scans no longer crash when viewing
v1.0.0.7
– Export patients – Exporting to .TC3 may cause the scans to be slightly different because of the different storage methods
– Import bug fixed
v1.0.0.6
– Lines mode changed. Right click on an area to delete it.
– Change user name added
– New Icon
v1.0.0.5
– 2.2 Upload bug fixed
v1.0.0.4
– Lines mode improved, Left Click to add, Right Click to remove lines
– Quick Scan button
– Email saving fixed
– Scan preview now shows longer distance
– Misc. bug fixes
– Input filtering
v1.0.0.3
– Removed all MySQL
– Progress bar for large patient files
v1.0.0.2
– Connection retries
– Minor bug fixes
– Narrative reports
– Utilization report reformatted
v0.0.9.69
– DB replacement
– “Patient Shared from” on shared patients
v0.0.9.68
– Misc bug fixes
v0.0.9.67
– All 3 stat types show on Overlay Screen at the same time. Selected type is used for the background color.
v0.0.9.66
– Improved DB reconnect
– NCM Tones sticking bug fixed
v0.0.9.65
– Comment for Line Overlay Printouts
– Email printouts
– More Main focus fixes
– Printing changed
– Daily report bug fixed
– Import from Tytron 2.2 improved
– Load patient loads from 2.2 if patient isn’t imported yet
v0.0.9.64
– MCT Readings
– Recoup Notifications
– Auto set break lines modified, now splits when slope changes
– Fixed NaN in NCM
v0.0.9.63
– Cervical Scan Start setting added for patients (Edit Patient)
– Stat totals in upper right highlighted
v0.0.9.62
– NCM/Fossa Tones option
– Fossa Peak Hold option
v0.0.9.61
– Beeps near previous scan distance option
– Stat averages on the top-right of scans
v0.0.9.60
– Keys in Overlay fixed
v0.0.9.59
– New scan comparison mode, absolute slope. Matches if the slopes have the same direction. Toggle Modes with ‘T’
v0.0.9.58
– Focus after switching programs bug fixed
v0.0.9.57
– Timezone fix
– Moved local DB and log file
– New scan comparison algorithm. Uses a weighted difference between slopes of scans.
Slope differences less than threshold 1 are 1, more than threshold 0 are 0, and linear in between
– Controls to change thresholds
– Grayscale bar on left side of comparison areas shows value at that point, White=1, black=0
– Toggle between new comparison and Pearson correlation coefficients with ‘T’
v0.0.9.56
– Bug fixes
v0.0.9.55
– Make Composite scans on Overlay with ‘M’
v0.0.9.54
– Break Lines for each graph(L, R, Delta)
– Pearson areas are highlighted on single scans
– Auto select Same Slopes on Overlay with ‘A’
– Misc Printing fixes
– Shift and Ctrl switched on Overlay for moving scans
v0.0.9.53
– New Patient bug fixed
– Pearson color changes
– Same Slope area calculator
– Same Slope minimum area 3 data points
– Break lines again have no minimum, but areas less than 3 data points show no data
v0.0.9.52
– Main Minimum Size fixed
– Comparison areas highlighted on Main and numbers shown
– Colors for Pearson numbers. They don’t save yet.
v0.0.9.51
– Break Lines now have a minimum distance of 3 data points
– ‘G’ for data point grid on Overlay Screen
v0.0.9.50
– Fit numbers adjust when scan is moved
– In Overlay, select scan, Shift-Click and drag to move, Ctrl-Click and drag to move vertically
v0.0.9.49
– Pearson correlation coefficient – View 2 scans and place pairs of break lines
v0.0.9.48
– Escape Clears Selection if Double Escape is enabled
– DT Average Lines fixed
– Delete scan on Overlay Screen fixed
– Ctrl-Click to edit scan on Main Screen
– Break Lines now print
– Timezone fixes, Recoup times should be fixed
– Overlay Screen line fixed
– DT Center Highlight option
– Data Logging
– Scan Stats option
v0.0.9.47
– Delete Composite fixed
– Composite added to right click menu
– DT Lines mode – “D” on Overlay Screen Ctrl-D on Main Screen
– Can now print Bar DT and Line DT
– Batch Printing fixed
v0.0.9.46
– Key Map popup with “K”
– Fixed Daily Reports
– Normal Example scan
– Output scans as .CSV with “O” on Overlay Screen
– Utilization and Info Reports
v0.0.9.45
– Previous Distance on Scan Bar uses the distance from scan ‘1’
– Old printouts for Dr. Hannah – use “H” on Overlay Screen
– Composite scans now save properly
– Sound on Fossa/NCM
– Fixed Delete Scan
v0.0.9.44
– 10 second flicker fixed
v0.0.9.43
– More data on bar graph printout
– Windows remember where they were. Reset button in Setup->Main
– Esc on View Screen switches back to Default view instead of closing if the view is not the default
– Notes use “Z” key in Main, Overlay, Composite, Congruence, and Scan Utilities
v0.0.9.42
– Up to 10 Bar Graphs on View Screen
– Composite scans color option
– Shortcut Keys on Load Patient
– Live Calibrate fixed
– Scan Clipping on overlay option “E”
– F11 toggles between All scans / Cervical Scans / Full Scans
– Recoup Suite collisions improved
v0.0.9.41
– Right click on Main for Transparent Scan
– Print Dialog for printing
– Distance of previous scan on Scan Bar (Setup->Scan Options->Previous distance on Scan Bar)
– Scan NCM numbers fixed
– Delete on right click menu on Main
v0.0.9.40
– Daily Report formatted
– Scanning Side by Side NCM+Chart (Setup->Scan Options->Side by Side)
– Arrow keys on Main, Up/Down scroll, Left/Right view DTs
– Composite move scans with mouse
v0.0.9.39
– About box fixed
– Scan Utilities Edit scan fixed
– Composite scan improvements and save
– First Name search option (Setup->Main)
– Pre When Post color fixed
– Daily Report more info. better formatting to come
v0.0.9.38
– Bargraph hover fixed
– Distance on ScanBar
– ScanBar redesign
– Fixed scanning hanging bug
– “P” to print from preview
– Main screen now saves selection order
– Changed main screen Full/Cervical indicator
v0.0.9.37
– Scan Screen optimization and options (Setup->Scan Options->Scan NCM and Scan Chart)
– Wait Cursor more places
– Double Escape to close patient option (Setup->Main->Double Escape to close patient)
– Clear Selection button on main screen
– Recoup Suite Sorting
– 8 Week updates with new scans
– Enter or Space Saves Scan without exiting
– Bargraph Fullscreen Details on hover
– Timezone issue fixed
– Improved connection handling
v0.0.9.36
– Recoup comments
– F12 reload last patient
– Recoup in order entered
– Fossa Fixed – Right probe Right side then Right probe Left side
v0.0.9.35
– Fixed Delta-DT colors
– Variable Recoup times
– F Keys fixed
– Recoup auto-clear
– Recoup over-count
– Moved buttons
v0.0.9.34
– Patient sharing
v0.0.9.33
– ‘A’-‘H’ keys for selecting recoup
– ‘I’ for load patient, exact ID# match returns immediately
– Local DB readonly bug fixed
– Daily report fixed
– Expand recoup button
v0.0.9.32
– Fixed Import bug
– Local DB Mode – Sync with cloud part 2
v0.0.9.31
– Local DB Mode – Sync with cloud part 1
– SQLite Local DB
v0.0.9.30
– Big DB changes
– Recoup buttons fixed
v0.0.9.29
– Screening Mode
v0.0.9.28
– Move scans in overlay changed
v0.0.9.27
– Search by First Name
– ROM Settings
– Device Manager and Devices and Printers in Setup
v0.0.9.26
– DT Lines option
– English Units option
v0.0.9.25
– Shift click moves scans on overlay screen
– Numbers remove scans on overlay screen
– Initials in Recoup option
– IDs in Recoup option
– Temperatures on overlay screen
– New tab in Setup
– 0 Bars option
– Multiple Pattern option
– Center Bargraph
v0.0.9.24
– Fixed line draw order for overlays
– Congruent screen buffered for performance
– Transparent Pattern resizes with Main form
– Symptoms/Diagnosis labels fixed
– Null checks improved
– More Congruence options
v0.0.9.23
– About box added
– Transparent Pattern improved
– Release Notes added
– Transparent Congruence added
*This is a beta version of the software and may contain bugs or incomplete features. It is not recommended for use in production environments. By using this software, you acknowledge that you may encounter errors, data loss, or system instability. Please back up your data regularly and report any issues to help us improve the product.